iOS 12 has been designed to focus on performance and reliability. Unfortunately, Bluetooth problems can always show up after an upgrade due to device firmware compatibility issues of external accessories.
Several iPhone users have found that their Bluetooth is not working after updating to iOS 12. This is primarily impacting users that use third-party Bluetooth headsets or speakers with their iPhone.
In this article, we will look at some of the symptoms and provide tips that have proven to work in the past. Furthermore, we will also look at some of the favorite third-party Bluetooth accessories and provide specific troubleshooting guidelines.
- 1 Common Bluetooth Issues After Updating to iOS 12
- 2 Bluetooth not Working after iOS 12 Update, How-To Fix
- 3 iPhone Bluetooth Not Working in Car with iOS 12, Tips to consider
- 4 iOS 12 Bluetooth Not Working with 3rd Party Accessories
- Common iOS 12 Problems and How to Fix Them
- Bluetooth Settings Grayed Out on iDevice, What to do
- Bluetooth Not Working, How to Fix your problems
- Apple Watch Bluetooth Issues
Common Bluetooth Issues After Updating to iOS 12
Please note that the Bluetooth iCon has been removed in iOS 12. This is the familiar icon that used to be located at top of your screen in iOS 11 versions. This is not a bug but a feature change in iOS 12.
Most of the symptoms reported center around the following issues:
- After updating the iPhone to iOS 12, the iPhone is unable to discover the third party Bluetooth device
- When connecting to the Bluetooth device, it merely spins forever while attempting to connect and doesn’t resolve
- A crackling voice on the speaker or headset of the Bluetooth device after updating iDevice to iOS 12
We will highlight a few tips and tricks that have proven useful in the past when dealing with Bluetooth problems.
Before proceeding to troubleshoot, you may want to make sure that there are no interference conditions as highlighted in this Apple White paper that could be causing your Bluetooth problems.
If you face any of the Bluetooth issues mentioned above, try each of the following steps until the issue resolves. For stubborn problems that won’t go away, you may need to back up your iPhone or iPad and restore it using iTunes.
Bluetooth not Working after iOS 12 Update, How-To Fix
The best place to start troubleshooting Bluetooth issues is with your iPhone or iPad. Before proceeding further, test if you can connect the Bluetooth accessory with an iPad that’s on an older iOS version to see if it works.
You can also test by connecting a friend’s iPhone, running iOS 12, to the Bluetooth accessory to see if it works. This will give you some ideas around whether the problem is with the Bluetooth accessory, or if it localized to your device running iOS 12.
- Quick Reset– The first and foremost thing to do following a successful installation of the iOS 12 update is to do a quick forced-restart of your device. On the older iPhones, you will do this by pressing the Home and on/off button together for 10 seconds or so till you see the apple logo appear. Release the buttons when you see the logo and let your iPhone startup. If you are using iPhone 7/8/X models, please check our iPhone reset guide for the steps.
- Toggling Bluetooth mode– If you are having issues with discovering your Bluetooth device on your iPhone, sometimes a simple toggle can do wonders. Tap on Settings > Bluetooth and turn off your Bluetooth. Next, Switch off your device and turn it back on followed by enabling the Bluetooth in the settings. Check and see if your Bluetooth device now shows up under ‘MY DEVICES’ in the Bluetooth settings. Please make sure to toggle the Bluetooth using the Settings app and not via the control center.
- Reset Network Settings – Start by tapping on Settings > General > Reset and choose ‘Reset Network Settings.’ Please note that you may have to re-enter your Wi-fi name and credentials once the reset process is done.
- Pair and unpair the Bluetooth Device – If you can see your Bluetooth device on the list under ‘MY DEVICES’ in settings, but you are experiencing connectivity issues, you can reset the Bluetooth device. Tap on the ‘i’ on the right-hand side of the row and choose ‘Forget This device.’ Switch off and restart your iPhone and then try connecting again to the Bluetooth device to see if it works for you.
One tip that seems to be working for some users is to unpair the Bluetooth device by following the above step and then reset all Network connections before attempting to pair the Bluetooth device again with the iPhone. Give it a try and see if that does the trick for you.
If you are still having issues and have tried connecting your iPhone to other Bluetooth devices without any results, you may want to consider backing up your device and performing a clean restore of your iDevice.
iPhone Bluetooth Not Working in Car with iOS 12, Tips to consider
If the Bluetooth issue primarily happens with connections to your automobile, you can read Apple’s guidelines around how to deal with this issue.
Apart from the guidelines from Apple in the article link, you can also check and see if your car has settings to add and delete devices to CarPlay. If you have the feature, you may want to remove your iPhone from your Car’s memory and then re-add it back to see if the issue gets resolved.
We removed the Bluetooth profile for the car from the iPhone Bluetooth settings ( Under My devices), as well as removed the phone’s profile from the car’s Bluetooth. Restarted the iPhone and then connected without the Contact sync feature of the car’s Bluetooth. The issue was resolved!
One important tip is when you are re-pairing your iPhone with your Car’s Bluetooth, skip the step when it comes to allowing contacts to be synced.
Quick Workaround for Car Bluetooth Issues with iPhone
When we had bluetooth issues, where it randomly would stop and then re-connect, manually disabling and enabling bluetooth settings on the iPhone did the trick, however, while connecting to the car, the BT issues showed up again. What worked is to remove the iPhone from the car’s bluetooth settings, added it back again and disable the contact sync feature of the car’s bluetooth. We are hopeful that this issue has been fixed with the latest iOS 12 Update.
We didn’t see as many CarPlay issues when testing with iOS 12 Beta. Hopefully, the problems that were seen in iOS 11 have been resolved.
iOS 12 Bluetooth Not Working with 3rd Party Accessories
JayBird Headphones Will Not Connect to iPhone After iOS 12 Update
If you are using a third party Bluetooth accessory such as Jaybirds and are having trouble establishing the Bluetooth connection, you may not be alone.
Please follow the sequence of steps to help pair the device
- Power off the external headsets
- Turn off Bluetooth in the iPhone settings
- Turn Bluetooth back on in the iPhone settings
- Hold the power button ON, on the Jaybirds, and CONTINUE holding it on, even after the buds tell you the status; “Power On, xx% charged”…
- Within a few seconds, Your iPhone Bluetooth screen should “discover” the earbuds.
- You can release the Power Button on your Jaybirds
The same steps should work for other models such as your JBL Flip. The key is to keep pressing the ON or the Start button until the iPhone discovers your device.
Bose Bluetooth Not connecting after iOS 12 Update, Tips to consider
If you have followed all the common resolution steps highlighted in the article and have not had success with connecting to your BOSE speakers, you may want to consider resetting the Bluetooth on your speaker.
Start by turning off all the nearby Bluetooth devices in the range of your iPhone or iPad. (if that’s possible). Next, Press and hold the ‘Mute’ button for 10 seconds on your BOSE device. This will disconnect your Bose mini speaker.
Restart the speaker and see if it works.
If that didn’t provide you with success, the next step while dealing with a Bluetooth BOSE device is to clear the Bluetooth memory from the speaker.
To do so, you will need to press the Bluetooth button for 10 seconds or so until you hear a tone. This clears up all the Bluetooth devices from the speaker. You can try to re-pair and see if it does the trick.
Amazon Alexa Bluetooth Issues with iOS 12
There are two types of supported Bluetooth profiles Alexa devices can use:
- Advanced Audio Distribution Profile (A2DP SNK) – Allows you to stream audio from your mobile device to your Alexa device.
- Audio/Video Remote Control Profile (AVRCP) – Allows you to use hands-free voice control when a mobile device is connected to your Alexa device.
When facing connection issues with Alexa devices, your best bet is to clear all Bluetooth devices from memory and then pair it back again.
As per Amazon’s guidance, you can clear the Bluetooth memory by following the steps below.
For Echo devices:
- Open the Alexa app, go to the menu, and select Alexa Devices.
- Select your device.
- Choose Bluetooth Devices.
- Select a device from the list, then select Forget Device. Repeat this step for all other Bluetooth devices on the list.
For Echo devices with a screen:
- Say, “Go to settings,” or swipe down from the top of the screen and select Settings.
- Select Bluetooth.
- Select the “info” icon next to the device name, then select Forget Device. Repeat this step for all other Bluetooth devices in the list.
We hope that some of the tips in this article were helpful in fixing the Bluetooth issues that you were having following the iOS 12 Update.
If you were unable to fix the problem, the next thing to do before taking your device to Apple specialists is to perform a backup and clean restore of iOS. Sometimes when there is a persistent issue, a clean restore of the device is the only way to resolve the problems.